occopational Safety and Health Management System is an integral part of Hospital Akreditation. Hospital personels are at risk of desease inaccident,many exposures,presen in the hospital environment,such as antineoplastic,microbiology,high work speed and ergonomic disorders.This research aimed to desribe the implementation of occopational Safety and Health Management System,and the impact of its program.Observational and interview was utilise to conduct this study.The presentage self assesment in acreditation hospital was assessed from the acreditation hospital,than analising the output of the hospital quality service is observed for the absention number,patients number,hospital income,work accidents number,paint number,than analyse from impact indicators eficiency,customer satisfaction,work performance and working condition.The result from the research,showed the parcentage number of the Panti Wilasa Citarum Hospital Health and Safety management system acreditation standart is 78,5%,this means that Panti Wilasa Citarum Hospital has fulfiled the standart which is made by health departmen throught the hospital accreditationcommittee.From the research outcome it is found,that is has given the influence to decreasing number of pain and number work accident,and also the increasing of income of the hospital.This result concluded thatthe quality service of the hospital was improved based on efficiency,customersatisfaction,work performance and working condition.This result is expected will be able to give the daescription of how far the implementation of health and safety management system in Panti Wilasa Citarum Hospital and the future,hospital expected to improve and develope the health and safety management system. Oleh: WAHYUDI CHRISTIONO. Kata Kunci: SMK3,Standar akreditasi,Output,outcome Work health and safety management system,acreditation standart,output,outcome
Wednesday, August 12, 2009
Implementation of the study GUIDELINES FOR WORKPLACE SAFETY Extractive CONSTRUCTION JOB
Employment extractive land is part of the construction services sector that has a risk or danger of fatal accidents that tend to be high. The Government has published safety guidelines and adequate health, but health and safety guidelines are not working are in the implementation in the field, especially to land a job search. This thesis discusses the problems in adherence to the guidelines of safety and health at work extractive land construction project, with the survey directly to do with the location of the field research in the area of Bandung and its surroundings. Analysis is performed descriptive analysis that explains the level of implementation of a variable guidelines safety and health analysis and diskriminan to know the difference between a variable guidelines compliance safety and health of working on the project, the project currently, and small projects. Keyword : manual of work health and safety, Excavation occupation. Master Theses from JBPTITBPP Oleh : Febby Ferial, S2 - Civil Engineering
THE IMPORTANCE OF ANTHROPOMETRIC ASPECT IN THE PRODUCT DESIGN.
Technology product can not be free from the ability of the designer to see the good side as well as the bad side of it’s design and operation. The effectivenes of it’s product also can not be free from the man who is in charge to design, operate and maintain it. This paper is intended to give an overview about the importance of human factor to be involved in the technology product from it’s design, operation and maintenance. Suharyo Widagdo; Bidang Sistem Proteksi dan Simulasi (BSPS)
Pusat Pengembangan Teknologi Keselamatan Nuklir-BATAN
Pusat Pengembangan Teknologi Keselamatan Nuklir-BATAN
DESIGNING OF COMPUTER BASED DATA ACQUISITION SYSTEM FOR TEMPERATURE AT BETA TEST LOOP
Design is conducted to develop, build a system of acquisition data based on computer that is used for temperature measurement during thermohydraulic experiment at BETA Test Loop. As temperature transducer, it is used thermocouple of type K (Chromel-Alumel). Previous temperature measurement was done using an LCD indicator of Shimaden and the record was conducted manually. Then a new data acquisition is built with Visual Basic application program and an interface of AT-MIO-64F-5 from National Instruments. The result of design have earned to develop, build a system of acquisition data temperature spannedly measure 0 - 500 ° C, can give appearance information which interaktif namely in the form of number of channel parameter which are acquired, also facilitate the data reading because all result of measurement will be able to be presented on the computer display at realtime. Other advantage is the ability to save the data into hard disk in the form a file and could be called with Excel program to be processed furthermore in the form of tables or the graph to facilitate data analysis. It can be concluded that that the data acquisition system developed could give result satisfying as expected and applicable to assist experiment Keywords : design, acquisition system, computer, temperature. Kiswanta, Anhar R. Antariksawan; Bidang Analisis Resiko dan Mitigasi Kecelakaan (BARMiK) Pusat Pengembangan Teknologi Keselamatan Nuklir - BATAN.
ASSESSMENT OF MANAGEMENT SYSTEM OF SAFETY IN THE WORKPLACE AND SAFETY CULTURE.
Culture can affect how someone behaves and acts. A good culture will results optimally, on the contrary a non conducive culture will never results optimally. In correlation with work safety, someone who is conditioned with a culture of discipline relatively will more has a certain attitude of obedient to the rule and etiquette wherever he is, and vice versa. On the other hand the factor of consciousness from someone in system is major determiner to achieve the successfulness in applying the management of safety and work health, and safety culture. Because of this reason, it is important to do an assessment about the application method of management system of safety and safety culture to the system for result as expected. Keywords: safety and work health, safety culture. M. Hadi Kusuma, S.T.; Bidang Evaluasi Pengembangan Keselamatan Instalasi (BEPKI) Pusat Pengembangan Teknologi Keselamatan Nuklir Badan Tenaga Nuklir Nasional.
REPAIRING OF ONE PHASE INDUCTION MOTOR.
The repairing of one phase induction motor has been performed. The 30 minutes functional testing of the one phase induction motor already repaired, the temperature at motor stator was not increase. The rotation speed of motor is 2950 rpm, decreased by 40 rpm from the initial condition. This condition is still categorized as normal. The electric current in each input cable for one induction motor is 3,0 Ampere. Keywords: electrical motor, one phase induction motor. Edy Sumarno Bidang Analisis Risiko dan Mitigasi kecelakaan (BARMiK) Pusat Pengembangan Teknologi Keselamatan Nuklir - BATAN
PROGRAMMING AT89C51 MICRO CONTROLLER FOR 7 SEGMEN DISPLAY
The 7 segmens display computer program for research of controlling temperature and heater power using micro controller had been done at P2TKN-BATAN. The purpose of this research was to implement 7 segmens as a reader of process temperature and also becoming a temperature reference for the controlling process. The test result revealed that a constructed program can work properly. The 7 segmens display showed an appropriate numerical value as a given input. Demon Handoyo, G.B. Heru K.H., Deddy Haryanto, Nurhanan, Ari Satmoko UPT-Balai Keteknikan
Pusat Pengembangan Teknologi Keselamatan Nuklir-BATAN
Pusat Pengembangan Teknologi Keselamatan Nuklir-BATAN
Management Safety and Health Construction Work
Job Safety and Health is a complex problem on a construction project. Workplace accidents and illness due to work is generally caused by management factors, in addition to technical and human factors. Research done at the Project Development Transportation Services Air-West Sumatra with data collection, direct observation and interviews with stakeholders in the project. From the data obtained, observations and interviews, the project manager need to do â € œManajemen Safety and Health Kerjaâ €?. This is done with the plan, to seek and implement preventive measures before the incident an accident and a strategy that causes the accident that had occurred not recur again. Strategies, among others, discuss safety and health in a routine meeting held diproyek, providing safety equipment and special training in a certain period. With the strategy is expected to create a work atmosphere that is safe and comfortable. Thus, the workers can work safely so that the work plan of the project can be completed on time with the quality of the work in accordance with the plan. Besides, can also improve the efficiency, effectiveness and productivity of workers. Oleh: Teddy adeba; Pembimbing: Akhmad Suradji, PhD Benny Hidayat, MT. Keywords: safety, health, construction, management.
THE OBSTACLE IN IMPLEMENTATION OF ERGONOMICS SAFETY AND HEALTH PROGRAM IN ENTERPRISES
Safety and health are the basic rights of the workers and one of the requirement to increased the
worker’s productivity. Beside that safety and health constitute requirement for winning free competition in the globalization and Asean Free Trade Agreement (AFTA), World Trade Organization (WTO) and Asia Pacific Economic Community (APEC). So that to followed free trade competition, safety and health program must be implemented in all working places. The ergonomics, not only increased the healthy and safety of the workers, but also increased the productivity. If the ergonomics safety and health can be implemented in the enterprises the safety and health and productivity of the workers will be increased. Although the implementation of the ergonomics safety and health principle in the enterprises had been applied and improved the healthy, safety and productivity of the workers but the implementation in the enterprises especially in the small and medium enterprises are still far from expectation. To find out the causes the observation study had been done during implementation of the ergonomics, safety and health program in small and mdium eneterprises in Bali since 1995. There are many obstacles were found such as: 1) the result of the ergonomics, safety and health implementation still in form of healthy, safety, comfort, efisien and the increases of productivity, but not yet showed in form of money (industrial language); 2) enterprises management took the lower priority to the ergonomics, safety and health program in operation of the enterprises; 3) the program of the ergonomics safety and health dominan in form of curative action compared with preventive and promotive; 4) other factors such as less of management and workers knowledge about safety and health, limited of capital, less of control and low enforcement of the government. So that the implementation of the ergonomics safety and health program should be attained the benefit in form of money not only to the workers but also to the enterprises. Control and low enforcement of the governement should be tightening and continued. Sutjana, D.P. Dept.of Physiology School of Medicine / Post Graduate Ergonomics Program Udayana University Jalan P.B.Sudirman Denpasar Bali. Keyword: safety and health, ergonomics, globalization, industrial language
worker’s productivity. Beside that safety and health constitute requirement for winning free competition in the globalization and Asean Free Trade Agreement (AFTA), World Trade Organization (WTO) and Asia Pacific Economic Community (APEC). So that to followed free trade competition, safety and health program must be implemented in all working places. The ergonomics, not only increased the healthy and safety of the workers, but also increased the productivity. If the ergonomics safety and health can be implemented in the enterprises the safety and health and productivity of the workers will be increased. Although the implementation of the ergonomics safety and health principle in the enterprises had been applied and improved the healthy, safety and productivity of the workers but the implementation in the enterprises especially in the small and medium enterprises are still far from expectation. To find out the causes the observation study had been done during implementation of the ergonomics, safety and health program in small and mdium eneterprises in Bali since 1995. There are many obstacles were found such as: 1) the result of the ergonomics, safety and health implementation still in form of healthy, safety, comfort, efisien and the increases of productivity, but not yet showed in form of money (industrial language); 2) enterprises management took the lower priority to the ergonomics, safety and health program in operation of the enterprises; 3) the program of the ergonomics safety and health dominan in form of curative action compared with preventive and promotive; 4) other factors such as less of management and workers knowledge about safety and health, limited of capital, less of control and low enforcement of the government. So that the implementation of the ergonomics safety and health program should be attained the benefit in form of money not only to the workers but also to the enterprises. Control and low enforcement of the governement should be tightening and continued. Sutjana, D.P. Dept.of Physiology School of Medicine / Post Graduate Ergonomics Program Udayana University Jalan P.B.Sudirman Denpasar Bali. Keyword: safety and health, ergonomics, globalization, industrial language
